Agentic AI Gardening

The use of AI is probably most popular for professional purposes as efficiency and economic productivity are major concerns in these fields of applications. Another whole lot of applications is rapidly developing as well, which is Agentic AI in hobbies like gardening. The use of IT in gardening has previously been reserved to landscape designers and maybe urban to rural planners. Cheap access to AI on a test basis or within your browser has widened access to computer and AI assistance for gardening purposes. Colorful designs and selection of species to enrich biodiversity are widely available now. The next step is, of course, agentic use of AI. If we have a sufficient number of sensors installed (and use weather forecast data as well), the data from the garden can easily be analyzed by AI and the mower or water pump can get going to do the job for us. This is not rocket science but only sensors, data and a couple of “if …, then” commands. The kind of pleasure will have changed accordingly shifting from the watering of plants to the satisfaction of successful programming. No value judgement here. The latter option has, however, a considerable business potential of almost industrial or agro-economic scale. 

Gardening Evolution

Researchers continue to study the impact of gardening on biodiversity and survival of insects. The study published by Tscharntke, Batáry and Vidal (2026) points our attention to the importance of areas in our gardens that are allowed to grow without mowing for several years. In many traditional gardening projects even in the 21st century, we observe a cut of grass-shoots in fairly regular time intervals, once a months for example. An English style lawn will be cut very short even more often than this. If we want to allow for an evolution of gardening and regaining biodiversity, we shall have to reserve substantial areas of a garden to allow grass-shoots to grow over several years (!). Such an evolution might be perceived in 2026 a bit like a revolution in gardening. Untidy spots are a response to “the need for unmown long-term refuges, protecting intact grass shoots for persistent insect populations” (Tscharntke et al. , 2026). The tree “Cercis siliquastrum” (Judas-tree) in the “Jardin des Plantes” in Paris dates back to 1785 and shows the impressive strength of nature to outlast changing gardening fashions even in a hotspot of gardening culture, history and evolution. Grass-shoots below might be allowed to last a couple of years as well.

Digital Sovereignty Practice

The claim to enhance digital sovereignty has to build on basic digital literacy skills. This is not difficult to learn but it does take some time and effort even if there are many learning tools free of charge available on the internet. The learning platform “labex.io” has taken me along on many of my first steps.
No matter which learning tool you prefer (maybe Linux foundation), just get started and practice a bit regularly. Progress will come and you’ll find using LINUX on one of your older computers or laptops rather fast again. Additionally, I find the large parts of black screen so relaxing to my eyes that I tend to write larger junks of text directly into small files again before use on the blog-editor elsewhere.
A nice side-effect is that this feels like years back when coding was an emerging skill. Learning has become so much easier nowadays, only the learners seem to still perceive many psychological barriers to get started.

Electric ships

The transformation of mobility to an all electric mobility has been discussed mainly with regard to a narrow vision of the automotive sector. Beyond land based vehicles like lorries, buses, cars and bicycles or electrification of trains, shipping has been a niche market of the all electric society. The amateurs of silent shipping, sailing and surfing have explored and adopted the electric alternatives for quite some time. The professional ferry boats and river crossings have also opportunities to join the all electric society with a range of ships available for orders like from “Ampereship”. The increasing share of electric fun on water and electricity-propelled ships gives additional drive to the “All-electric-society”. 

Switch off

We have many associations with the imperative “switch off”. Depending on your background or state of mind, you might associate “to switch off” with a mental state, i.e. to calm down. Instead of buzzing about, juggling with multiple projects or deadlines at the same time, the reduction on a few major preoccupations can be achieved through a switch-off. In electrical engineering the switch, as switch-off or switch-on, is a key component of electrical circuits. In programming languages a key element is the switch implemented as an “if-condition” in form of “do if X=True”, in its easiest form.
Let us develop a social science corollary of a theoretical concept of “switch-off”. At times of energy shortages the switch-off option becomes an often overlooked or discarded option. Switch-off an engine to lower overall consumption of energy is a very powerful mechanisms. We do this manually by switching off lights, or as programmed or AI-assisted versions in modern homes. States might impose the switch-off of street lights or loud music after certain hours. In an energy crisis the switch-off option needs to be moved to center stage again as any MegaWattHour not consumed does not have to be (1) produced, (2) moved to local provision and (3) distributed. Additionally there is (4) less waste that has to be taken care of. Hence, the switch-off option is a fourfold win-win-win-win-situation. Who cares about this option as all 4 kinds of savings do not increase a standard measure of GDP in an economy? Broader social science perspectives may offer precious indications that “less can be more“.

AI Motion Sculpture

At the Festival Noûs in Paris, the collaboration of AI with artists was a major event. Based on the huge collections of the BNF in form of data bases it is possible to join the 3 worlds of library conservation, technological innovation like AI and the imagery of artists. In the preparation of the exhibits and the parallel documentation of the genesis of the exhibits of the artists, the creative potential and process becomes more evident and understandable to broader audiences. The exhibit by Tobias Gremmler, Anatomy of Motion (2026 see below), captures the motion of a dancing body in a sculpture based on a 3D printing of a series of images blended into each other. with a fast photography camera, known from sports images previously, the dynamics of a motion become a tangible sculpture. The intriguing new form is in fact a motion that has been captured or has cristalized or materialized in a permanent fashion. New technologies and materials enter into art as they offer new ways of expression as well. The collection of art and documentation centers shall enter into new phases as well. (Image: Tobias Gremmler, Anatomy of Motion (2026) at BNF 2026-4).

Interests in failures

Decades or centuries after a successful or unsuccessful innovation, an evaluation of the reasons and circumstances of a temporary or permanent failure is informative. In the energy sector we observe another round of a power play in 2026. The more decentralized energy production and energy consumption models have been quickly put aside shortly after the oil crises of 1973 and 1979. The innovations using wind energy or solar energy of the 1980s have been discarded and were commonly considered as failures to provide cheap and reliable energy. An open international economy with expanding global markets for energy were perceived as a superior conventional solution. A country’s balance sheet of imports of energy and exports of higher value goods and services was the predominant economic rational and standard knowledge of the mainstream theory of trade. Other solutions, like a distributed “prosumer” model of energy might have ecological benefits, but would not show up in national GDP-statistics as a large part is home-produced energy and not accounted for in statistical measures of GDP, just like the home produced meals, health and care provided by mostly women. Societies, however, have a choice and an obligation to evaluate the interests in failures as economic and social development hinges on it in the medium to long run.

Failure as criticism

The production of an object, which does not abide by the norms and conventions of its designated use, can either be considered a failure, a commercial flop or a critical comment on consumerism. In some instances it may even have the intention to produce art rather than a useful product. A tea or coffee pot may serve as such an example of it (see image below). It is designed not to serve tea or coffee in a conventional way. Such an object invites us to think around the corner,  whether we could still use it in the “normal” way. We are forced to innovate as user or we just leave the object aside. The Flops exhibition also included early car examples which used a “Wankel car engine” and the aerodynamic adjusted car model (shape of a peach) of the R14 in its flops collection which were early precursors of a, later on widely followed, car design principle. Such an aerodynamic car design saves energy and therefore increases the reach of the car without refueling or battery charging.

Overall, some supposed failures are more indications that we are not easily prepared to accept behavioral changes or alternative visions of products.

Time dependent failure

The collection of failures has an ambiguous relationship with time. Some innovations that are celebrated at a specific point in time shall be considered failures at some later point in time. The Musée des Arts et Metiers has an early version of a solar panel on display dating back to 1996 (see image below, Photowatt 1996). This example reflects the cycles of public as well as expert opinions about technical innovations that either are en vogue or at disgrace. Ecological, design and economic considerations enter into the consideration of what constitutes a failure. Claims of European energy sovereignty may additionally enter into the failure equation. The time horizon over which energy savings are generated is yet another element in the judgement. The more general perspective should take sustainability and depreciation of quality of an object into consideration. The Flops exhibition just scratches a bit on the surface of an important and rather complex issue of the relationship of society, technology and innovation.  Surely, there is more to come in terms of flops and failures, and this is okay in most cases. 

Revolutionary time

The French revolution has certainly been a turning point in the development of democracy. The radical changes proposed at that time comprised changes to the calendar and the counting of time. Rather than a clock using a system based on the system of multiples of 12, 24 hours for a day and 60 minutes per hour, the revolution proposed to shift to a time system based on multiples of 10, just as for weights,  lengths or volumes. After decimal time had been adopted in 1793 it was disbanded in 1795 as being too revolutionary and declared a failure. We keep being used to 60x24h= 1440 minutes per day rather than for example a 10×100 =1.000 time intervals for a day. We are just so used to acquired habits that behavioral patterns have taken hold of us without us even noticing them. Maybe AI will eventually tell us to adapt because of computational speed of a superior time measurement system just based on a 0/1 based alternative counting algorithm. (Image: Universal dial regulator, Fail collection Musée Arts et Metier, Paris).